GIGAMAT

The drive solution for high loads


The GIGAMAT is designed for extreme loads. This stable high-performance drive provides significantly more mechanical power than comparable solutions. The single drive provides a high push force of up to 10,000 Newton and a pull force of up to 7,000 Newton. Its adjustment speed is 19.3 mm/s with a stroke length of 550 mm. Thanks to its characteristics, the heavy-duty drive is especially well-suited for lifter applications that are designed for severely overweight patients.


Versatile and efficient


Users also benefit from many configuration options of the GIGAMAT. The drive can be equipped with an adjustable gear clevis (only for pull-drives up to max. 1,000 N), an additional limit switch and a potentiometer.


Advantages at a glance


  • Very stable heavy-duty drive    
  • High push and pull forces    
  • Manual emergency lowering    
  • High IP protection class    
  • Especially well-suited for lifter applications

  • Load capacity: max. 10000 N push / max. 7000 N pull
  • Adjustment speed: max. 19.3 mm/sec. *
  • Stroke length: max. 550 mm
  • Equipment options: adjustable gear clevis (only for pull-drives up to max. 1000 N), additional limit switch, potentiometer
* depending on drive configuration at constant 24/29 V DC without load

Standard configurations

Performance data

Load capacity

max. 10000 N push
max. 7000 N pull

Adjustment speed 1

max. 19.3 mm/sec.

Stroke length

max. 550 mm

Fitting dimension (B) 2

210 mm + stroke

Duty cycle

2/18 min. or 10 %, max. 5 switching cycles per minute

Motor voltage

maintenance-free 24 V DC motors

Components

Limit switch

with micro switch

Stroke pipe clevis

drill hole: 10 mm
recess: 5/8 mm

Gear clevis

die cast zinc
drill hole: 10 mm
recess: 5/8 mm

Stroke pipe

stainless steel

Guidance profile

aluminum untreated

Housing colour

light grey RAL 7035

Motor connecting line

grey, straight, 300 mm, LSP-plug, PVC
grey, straight, 830 mm, LSP-plug, PVC

Further data

Protection type

max. IPX6

Protection class

III

Relative humidity

30% - 75%

Ambient temperature

+10°C - +40°C

Extra configurations

Components

Position feedback

potentiometer

Clevis

adjustable gear clevis (only for pull drives up to max. 1000 N)

Motor connecting line

pluggable

Further data

Quick release / Retracting function 3

mechanical retracting function up to max. 10000 N (only for push drives), special mechanical retracting system for patient lifter

Equipment options

additional limit switch

1 depending on drive configuration at constant 24/29 V DC without load

2 see technical drawings

3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.

Find out more »

Our Brands

Contact