DD 11
Elegant and comfortable: the DD11 system for electronically adjusting the table height. The DD11 system does not require a crossbar or a visible opening in the sectional profile.
- Adjustment load: max. 700 N / 157 lbs pressure
- Adjustment speed: max. 35 mm (1.38") per second with no load
- Stroke length: 500 mm / 19.68"
- 2-part rectangular steel column, upward-telescoping, inner profile telescopes out
Standard configurations
|
Adjustment load |
max. 700 N / 157 lbs pressure |
|
Adjustment speed 1 |
max. 35 mm (1.38") per second with no load |
|
Stroke length |
500 mm / 19.68" |
|
Installation length |
650 mm / 25.59" |
|
Duty cycle |
2 min. ON / 18 min. OFF (or 10%) |
|
Motor voltage |
maintenance-free 24 V DC motors |
|
Components |
|
|---|---|
|
Limit cut-off |
above + below: via virtual limit switch |
|
Housing colour |
silver RAL 9006, black RAL 9005, white RAL 9016 |
|
Supply line |
1200 mm / 47.24", smooth – Mini-Fit Jr. plug 4.2, 2x4 |
|
Additional data |
|
|
Protection degree |
IP20 |
|
Protection class |
III |
|
Relative air humidity |
30% – 75% |
|
Ambient temperature |
+ 10 °C – + 40 °C |
1 Depending on the drive configuration and the control components being used.
Our Brands
© 2018 Phoenix Mecano Inc.
