BoLink Archives - Phoenix Mecano

Home//Products//Product Lines//Bopla//BoLink

Product Highlights

Without wall brackets

csm_BoLink_02_Mit_Wandlaschen_With_Wall_Brackets_27d64a5186.jpg

With wall brackets (WL); Screws on the back

csm_BoLink_03_Mit_Wandlaschen_Schrauben_Oben_With_Wall_Brackets_Screws_53991ee4a3.jpg

With wall brackets (WL DO); Screwing system from the front

csm_BoLink_04_Designdichtung_Design_Sealing_9d1f101da1.jpg

Ingress protection IP 65 by means of design seal; available in various colors. This increases the electronics mounting height by approx. 1.7mm.

A 1.6 mm thick PCB can be clamped directly between the enclosure parts and optionally hot melted and clenched via two pins.

csm_BoLink_06_Folienflaeche_Membrane_Keypad_d1db372865.jpg

Recessed membrane area (0.6 mm) in the lid and base; interfaces can be fitted on four sides.

Pressure compensation by mounting the DAE-D11 pressure compensation membrane. For this purpose, drill (or punch) a hole in the moulded contour from the inside and glue the membrane in position.

1 basic size
3 heights
2 colors
3 variants (without wall brackets, with wall brackets, with wall brackets and lid fixing on top)
Design seal optional
PC material is suitable for outdoor use due to f1-listing according to UL 746C